Home  »  Products  »  Ethernet Switches  »  8 PORT UNMANAGED FAST ETHERNET SWITCH

8 PORT UNMANAGED FAST ETHERNET SWITCH (Model: TSW 8008P)



Telenet’s TSW 8008P is the most cost-effective solution to share network for SOHO users. With easy Installation and configuration, this Plug-&-Play super-compact switch instantly provides reliable network with five new and independent bandwidths with the utmost hardware flexibility.

In addition, each 10/100Mbps port is equipped with built-in Auto-MDI/MDI-X and Auto-negotiation functions. With the user-friendly and hassle-free features, this switch is designed to reliably meet the diverse performance demands of mid-size network, which do not require management capabilities.

 

FEATURES

  • Non-blocking Performance Improves Access to Network Resources
  • Eight Independent Bandwidths with 10Mbps – 200Mbps Capability
  • All Ports Support Auto-negotiation and Auto-MDI/MDI-X to Facilitate Installation and Troubleshooting
  • Full Wire Speed Store-and-Forward Technology Instantly Eliminates Bad Packets
  • Support IEEE 802.3x Flow-control for Full-duplex and Back-pressure Flow-Control for Half-duplex.
  • Delicate Plastic Palm Size with an External Power Adapter
  • Support 1K MAC Address
  • Built-in High Efficiency SRAM for Packet Buffer
  • Easy-to-Understand LEDs Display Real-time Traffic Status to Monitor and Diagnose the Network
  • Built-in High Efficiency SRAM for Packet Buffer
  • Broadcast Storm Filter, Runt and CRC Filtering Eliminate Erroneous Packets to Optimize the Network Bandwidth.
  • Support Power Saving Mode by Cable Detection
 
Technical Specifications
Model
TSW 8008P
Standards

100BASE-TX,IEEE802.3u
10BASE –T , IEEE 802.3
Ports
Eight 100BASE –TX/10BASE-T
Media support

10BASE-T category 5TP
10BASE –T category3,4 or 5 TP
Connector
STP RJ-45 port for TX
Bandwidth
100BASE-TX/10BASE-T – 200/100/20/10Mbps,via Auto-Negotiation
Duplex modes
All ports support half-duplex or full-duplex operation
crossover
Supports Auto-MDI/MDI-X crossover function
LED indictors

One LED for power on/off
One LED per port for link (green) / activity (blinking )
Input power requirement
+9V DC, (0.5A-1A)
Power consumption
9W maximum
Environment


Operating temp :0*C -50*C (32*F -122*F)
Storage temp: 20*C – 70*C (-4*F 158*F)
Humidity : 10% - 90% RH
Certifications

FCC part 15 class A,CE class A
159x103x 23mm (6.26 x 4.05 x 0.91 inches )